Superbox 3.27 to 1 ratio for 020 and 05 brushless motors| Designed for | Astro Brushless 020 and 05 |
| Reduction Ratio | 3.27 to 1 |
| Output Gear | 36 tooth |
| Pinion Gear | 11 tooth |
| Motor shaft | 1/8 inch diameter |
| Prop Shaft | 1/4 inch diameter |
| Prop Nut | 1/4 x 28 |
| Housing | Aluminum |
| Bearings | Ball Bearings |
| Firewall Mount | Four 4-40 screws |
| Motor Screws | Two 4-40 screws |
| Motor Centers | 5/8 inch |
| Gear Box Weight | 1.25 ounce |
| Gear Box length | 1 inch |
Revised March 2008
Please be sure to lubricate the metal gears before running the
gearbox at high power and after every hour of use. Any light grease will
work fine. We use bike grease or white lithium grease. Make sure there is
proper clearance between the gears. To set the clearance place a narrow
strip of computer paper between the pinion and spur gears,press the gears
together, then tighten the mounting screws. Then turn the shafts to eject the
paper strip and go play!
This product was added to our catalog on Tuesday 04 March, 2008.
